Craftin Dessert Divas Stamps

Craftin Desert Divas – Donut Party Stamp Card

DonutPartyCreativeMuse10
Craftin Desert Divas – Donut Party Stamp Set @creativemuseatwork

Hello everyone. Thanks for stopping by. I am here to share another project for this week. In this card, I used Crafting Desert Divas’ Donut Party Stamps. I got this stamp last year and this is the first time I was able to use it in a project. I also made my own pattern paper using Adobe Illustrator. I enjoy creating patterns on my own instead of purchasing new pattern papers and Adobe Illustrator is a great tool in creating unique designs for your projects.

DonutPartyCreativeMuse04

The supplies that I used in this project are Cardstock (white, teal, yellow and pink). Donut Party Stamps, small rectangle stitched and lace trim dies, Winsor & Newton markers, Memento Tuxedo Dye Ink, Tsukineko Emboss Ink, Ranger White Embossing Powder, heat gun, Tim Holtz stamp platform, and WRMK score and trimmer board and other basic crafting supplies.

I prepare the base of the cards first by scoring and trimming my white cardstock into 4-1/2″ x 5-1/2″ then I fold it in half. I also scored and cut the teal cardstock into 4-1/8″ x 5-1/8″ and the polka dot pattern paper into 4″ x 5″.

DonutPartyCreativeMuse06
Lace trim and square stitched die cut. Sorry I forgot to include the yellow rectangle die cut and the teal belt cardstock in the picture @creativemuseatwork

To assemble the belt of the card, I used the lace trim die in the pink cardstock and die cut it twice and the stitched rectangle die on the teal paper and yellow cardstock. The yellow cardstock is 1/8″ of an inch bigger than the teal rectangle die cut. I only traced  I also cut a half an inch piece of teal cardstock for the belt. The papers I used are from my scrap stash. I always keep my scrap papers for future projects like this. I made a 1/4 allowance for the pink lace trims and glued both at the top and bottom of the half an inch teal cardstock.

In the stamp set, I choose the stamp with the bear and bunny eating donuts in a table. I am not sure if they are actually eating the donuts or selling them. The stamp reminded me of the time when my daughter and I went on a school field trip. We spend our time eating mini donuts while waiting for the theater to open to watch a play titled, Rapunzel! A Very Hairy Fairytale! We really had a great time. I digressed so let’s get back to card-making. I colored the stamp with my Winsor & Newton markers. I love these markers. They blend very well. Since the stamp does not come with a coordinating die, I fussy cut the stamp after I colored it.

I embossed the sentiment in the small teal rectangle stitched die cut paper using my Ranger White Embossing Powder and heat tool.

To put the card together, I adhered the pattern paper on top of the teal cardstock with a tape runner. Then I placed the belt half an inch away from the bottom of the card. I wrap it around the cardstock and used a scotch tape to secure the belt. I glued the sentiment and the stamp together with a tape runner. I decided to cover the table part of the stamp with the sentiment as it would not fit. With a foam tape, I adhered the stamps at the top of the belt to finish the card.

You can always recreate this card in different ways using different products. I hope you like this week’s card project and thank you once again for visiting. Till next time.

Valentines Day Cards

Valentine Glitter Card

Hi! I’m here once again to share another card for Valentines. This will be the last of the Valentines inspired cards that I will be posting for this year. The last card I made was colorful and wacky not your typical mushy Valentines card so I decided to create a simple and back to traditional lovey-dovey Valentine card. In this project, I went back to basics, of course, there won’t be a Valentine card without a heart design so that would be the centerpiece of this project but I wanted to make it more interesting by using a red glitter adhesive foam sheet. (of course, it has to be red lol)

Valentine09
Valentines Glitter Card @creativemuseatwork

Valentines01

In this project, I used the following materials: Concord and 9th Cuddles & Hugs Stamps. I used the big heart with sentiments. For the card base, I used a red cardstock measuring 4 1/4″ x 11″ and I fold it in half.  3 7/8″ x 5 1/4″ light pink cardstock , light grey cardstock in 1 1/2″ x 4 1×4″, heart background embossing folder, red glitter foam adhesive sheet, heart shade cutting die with lace trimmings, Lawn Fawn White Pigment Ink, Ranger White Embossing Powder, heat gun and other basic crafting tools.

I usually score and cut the base of the card first using my WRMK scoring board. I cut the other end of the grey cardstock into a fishtail banner. With the heart background embossing folder, I run the light pink cardstock in my Big Shot Machine. I made two die cuts of the heart-shaped die, one in the red glitter adhesive foam sheet and one in a piece of white card stock. The white die cut will serve as a stiff base for the glitter adhesive foam. I used the lace trimming of the die cut. I kept the scrap heart-shaped foam for future ideas. (Always  keep your scrap paper)

I stamped the heart shape sentiment in a red cardstock using Lawn Fawn White Pigment Ink using my Tim Holtz Stamp Platform. I let it dry for a while then I heat emboss the sentiment “Happy Valentines Day” from the stamps I previously used from Art Impressions Valentine Bear Stamp Set in a small red cardstock. I did some masking when I stamped the sentiment with my Tsukineko Emboss Stamp Pad. The sentiment was not aligned so I masked the sentiment below and stamped the first word “Happy” and then heat embossed it. Then I masked the first word “Happy” and did the same thing with the rest of the stamp to make a one-line sentiment. Once the pigment ink dried, I die cut it using the same heart die for the centerpiece.

Valentines05

To assemble the card, I adhered the light pink cardstock on top-center of the red base of the card. I glued the grey banner in the middle. I positioned and glued the red heart centerpiece an inch lower from the top part of the card. Next, I used a fine tip glue and placed the red glitter foam sheet around the heart centerpiece. I had to make sure that there are no white spaces peeking on any side of the centerpiece. To finish the card, I used my Scotch foam double-sided tape to glue the sentiment below the heart centerpiece.

 

Valentines10
Finished project Valentine Glitter Card @creativemuseatwork

Thank you for taking the time to visit my blog and Happy Valentines Day to everyone! Till next time. Cheer!

 

Valentines Day Cards

Valentines Day Bear Card

Hi there! I’m back with a new card to share with everyone. It’s a Valentines Day card we can give to our family and friends to express our love and appreciation.

Valentines Card 11
Valentines Day Bear Card @creativemuseatwork

In this project, I used my Valentines Bear Set Stamps from Art Impressions which is perfect for the occasion. I also used a few love-inspired stamps from my collection. The materials I used are the following: Cardstocks (white, black and red), American Crafts pattern paper from their Hip Hip Hooray Paper Pad, Winsor and Newtown Markers, Memento Ink in Tuxedo Black, Tsukineko Embossing Stamp Pad, Ranger White Embossing Powder, Heat Gun, and other basic crafting tools.

For starters, I cannot find a good Valentine message on my stamp collection that I could I use for the card so I decided to print one using Adobe Illustrator. You can always opt to do a handwritten message. I got the message from a Facebook post of a dear friend of mine.

Valentines Card 04

Using my WRMK Scoring Board, I scored and cut my cardstock. The measurements that I used: ( I sort of made some allowances in case I need to trim it down) White: 5 1/2″ x 10″ then I fold it in half,  Black: 5 1/4″ x 4 7/8″, Yellow pattern paper: 5 1/8 x 2″ and a white strip in the middle: 5 1/8 x 5/8 of an inch. I used a non-Valentine inspired pattern paper as I wanted to make the message and the decorations standout.

I used my Tim Holtz Stamp Platform to stamp the bears. This tool is quite helpful when you have to stamp over and over again to make a good impression most especially on big stamps like what I used in this project. I also colored them using my Winsor and Newton Marker. I do not have a coordinating die for these stamps so I had to fuzzy cut each one. I heat emboss the sentiment on a piece of red cardstock with a white embossing powder from Ranger then cut it using my paper guillotine.

To assemble the card, I glued the two pattern papers first in the black cardstock and then the small white piece in the center before I adhere it on top of the white cardstock which will be the base of the card. Next, I put all the stamps together in the center. I used a Scotch foam adhesive for the sentiment to pop-up. I stamped an extra bear with a string of hearts inside the card right next to the message and colored it as well to complete the project.

Valentines Card 13
Valentines Day Card finished project @creativemustatwork

I really had fun working on this card and I hope everyone would also be inspired to create their own. Till next time and happy crafting!